Space PV Modelling#

OrbitalPV reuses tested photovoltaic equations from pvlib where their physical assumptions remain useful, while keeping spacecraft-specific inputs outside terrestrial modelling abstractions.

Reference model#

The first reference layer uses a calibrated PVWatts-style DC model. The reference power is defined at an explicit irradiance and temperature rather than silently assuming terrestrial STC is the spacecraft design point.

Effective irradiance#

The initial broadband model is:

\[G_{eff} = G_{AM0} f_{eclipse} f_{AOI} f_{spectral} f_{optical}\]

where each factor is supplied by a separate physical or calibration layer.

Sequential power and loss stages#

opv.pvwatts_loss_chain exposes the individual cumulative powers behind a PVWatts-based reference prediction, then adds optional degradation, mismatch, harness, conversion and controller factors. It returns each stage in watts and preserves temperature or irradiance gains relative to the reference.

The factors describe independently measured states or explicit assumptions; they are not inferred from low power. Inherent cell and coverglass efficiencies already included in the calibrated reference must not be applied twice.

Combine these predictions with opv.power_loss_breakdown and opv.summarize_power_losses to obtain signed power contributions and an energy waterfall. See PV loss budgets and operating diagnostics and the PV-analytics gallery for complete examples.

Single-diode modelling#

The De Soto/single-diode adapter is useful for silicon and other single-junction experiments, parameter-estimation tests, and validation.

It should not be interpreted as a native III-V multijunction model.

Space cell technology simulator#

OrbitalPV 0.4 adds an empirical AM0 cell simulator for technology comparison and early mission/system studies. It exposes five built-in reference technologies:

Technology

Junctions

AM0 baseline

Crystalline silicon

1

16.8 %

Single-junction GaAs

1

19.0 %

InGaP/GaAs/Ge triple-junction

3

29.5 %

Four-junction III-V

4

31.5 %

Inverted metamorphic (IMM)

4

32.0 %

The silicon, 3J, 4J and IMM electrical reference points are anchored to the NASA Small Spacecraft Technology State-of-the-Art power-system survey. The single-junction GaAs baseline follows NASA heritage AM0 values and published GaAs voltage/efficiency ranges.

The model reproduces reference Voc, Vmp, Jsc and Jmp with an empirical I-V shape and then applies:

  • irradiance scaling from the AM0 reference;

  • logarithmic irradiance dependence of voltage;

  • technology-specific temperature coefficients;

  • a configurable 1-MeV-electron-equivalent radiation retention factor.

Example:

import orbitalpv as opv

result = opv.simulate_space_cell(
    "triple_junction",
    irradiance_w_m2=1361.0,
    cell_temperature_c=80.0,
    fluence_1mev_e_cm2=5e14,
)

print(result.vmp_v, result.pmp_w_m2, result.efficiency)

The built-in radiation-retention values are deliberately broad comparison assumptions. They are not qualification data for a specific commercial cell. For flight design, create a custom orbitalpv.SpaceCellTechnology using manufacturer or campaign-specific radiation/temperature measurements.

NASA references#

NASA Small Spacecraft Power Subsystems: https://www.nasa.gov/smallsat-institute/sst-soa/power-subsystems/

NASA Solar Power Technologies for Future Planetary Science Missions: https://science.nasa.gov/wp-content/uploads/2023/09/Solar_Power_Tech_Report_FINAL.pdf

Junction-resolved roadmap#

The empirical simulator is intentionally a system-level layer. A higher fidelity multijunction model should preserve junction-specific spectral response and series current matching:

AM0 spectrum
    ↓
spectral response per junction
    ↓
junction photocurrent
    ↓
current matching + tunnel junctions
    ↓
junction-resolved I-V
    ↓
string / array topology

This is the next fidelity step for detailed materials and radiation studies.